The RPM can be adjusted in 100 RPM increments and is retained in memory even when power is removed.

A selectable repeat feature allows as many shifts in a pass as needed at the RPM setting or can be set to only one shift so it won’t waste air or CO2 down track.

Also a handy shift test feature allows the testing of the wiring, shift solenoid, and shift cable without the motor running.

Single RPM Setting Activated Switch:
Face Size: 4" x 3-1/4" x 3/4"
Overall Size: 5-3/8" x 3-1/4" x 3/4"

Features / Specs:
Auto Reset - No buttons to press!
Shifts one or two gears at the same RPM
Mounting tabs for easy installation
Microprocessor controlled timing
Retains all numbers when powered off
Large LCD (Liquid Crystal Display)
Works with 4, 5, 6, 8, 10, 12 cylinder engines
3000 - 9900 RPM Range that can be change by pushing the buttons on the face of the unit Test Feature - Test your shifts by holding down either button for 2 seconds
Two Separate outputs - Normally open, and closed. (For CO2, Air, or Electric shift applications)
Programmable Repeat Feature - Unit can be programmed so it won't activate again at the finish line. This will save air for vehicles using air, or CO2 shifters.